Attachment catalogue

MLT 625-75 H

July 22, 2026

• Wide selection of capacities ranging from 900 L (31.8 ft³) to 3000 L (105.9 ft³).
• Light material bucket designed for handling loads with a density ≤ 1000 kg/m³ (62 lb/ft³).
• Reinforced structural design across the base, blade, and sides.
• "DA" version features a tip angle increased by 10°.
• Optional 500 HB reversible wear plate available for enhanced durability.

[The 3D picture at the top of this page is the reference CBA 2500/2450 - 570554].

• Ideal bucket for bulk products (grains, woodchip, mineral feed etc.).
• Specific convex shape to facilitate loading and unloading operations.
• The shell is designed with a 3° angle between the bottom of the bucket and the cutting edge for better longevity.
  

• 4 in 1 bucket suitable for handling materials with a density ≤2100 kg/m³ (131 lb/ft³).
• Rear bolted counter blade dedicated to levelling.
• Claws fitted on the mobile part's back side help handling cylindrical objects such as poles, tubes etc.
• Reinforced structure (base, blade and sides).

[The 3D picture at the top of this page is the reference B4x1 340/1500 - 52707200].

• Versatile and very robust bucket.
• Designed for executing different operations :

→ Loading and unloading operations
→ Leveling ground
→ Backfilling trenches
→ Clamping and grabbing

• Features high-strength forged teeth (FO) for superior durability.
• Designed for handling bulk materials with a density ≤ 1000 kg/m³ (62 lb/ft³).
• Equipped with dismountable sides, removable teeth, spill guard, and a 500 HB bolt-on cutting edge as standard.
• Reinforced structural design across the base, blade, and grab for an extended service life.
• Fitted with nitritized cylinders and bolted shaft stops for enhanced reliability.

[The 3D picture at the top of this page is the reference BG 2450/1700 FO - 52549810].

• Versatile bucket suitable for diary use and different agricultural applications. Ideal for efficiently handling manure and silage, as well as straw bales, and ensures clean cutting of hay silage.
• Complete opening >90° and powerful jaw allows working flush with walls.
• Must-have tool for livestock farm.

• Forged teeth - FO.
• Handling materials with a density ≤ 1000 kg/m³ (62 lb/ft³).
• Dismountable sides, removable teeth, spill guard and 500 HB bolt-on cutting edge standard.
• Reinforced structure (base, blade and grab) for extended lifespan.
• Nitritized cylinders, bolted shaft stop.

[The 3D picture at the top of this page is the reference BG 2450/1700 FO - 52549810].

• Robust and versatile bucket suitable for diary use and different agricultural heavy-duty applications.
• Complete opening>90° and powerful jaw allows working flush with walls.
• Perfect for handling manure, silage... 
• Must-have tool for livestock farm.
  

• Wide range of bucket capacities.
• General purpose bucket suitable for handling materials with a density ≤ 2100 kg/m³ (131 lb/ft³).
• Reinforced structure (base, blade, sides).
• Optional "LDR" 500 HB bolt-on wear plate.
• TSDL : Bucket to be used on machines equipped with an integrated side shift carriage.
• Note: road circulation kit mandatory in Italy. Contact your dealer.

[The 3D picture at the top of this page is the reference CBR 730/1850 - 52000369].

• Essential attachment for your everyday handling needs, combining robustness with ease of use.
• Versatile tool ideal for consistent loading and unloading operations of various materials.
• Perfectly suited for handling bulk commodities: sand, gravel, earth, broken glass, etc.
• Durable design effectively meeting the requirements of a wide range of tasks across different jobsites.

• Synchronized hydraulic movements.
• Hydraulic motor integrated within the rotor for complete protection & extended lifespan.
• Reverse rotor rotation for optimized bucket filling.

[The 3D picture at the top of this page is the reference CRS 2550/2000 - 52612540].

• Loads and aerates silages in a single pass.
• Provids ready-to-use feed for direct distribution or mixer wagon use
• Clean silage pit face, limits secondary fermentation.
• Time-saving, a single attachment for the handling of silage and bulk feed.
• For corn silage and grass silage (short wisps).
  Not suitable for long wisp silage (10 cm / 4 in max.).

• 2 x 3 teeth.
• Interchangeable arms allow for switching between wrapped bale handling and standard bale handling.
• Switch from a synchronized to an unsynchronized closure.
• Very good lifting capacity up to 800 kg (1764 lb).
• Handles 1 round wrapped bale Ø from 1 m (3.3 ft) to 1.6 m (5.2 ft).
• Handles round bales Ø from 0.9 m (3.0 ft) to 1.8 m (5.9 ft).
• Handles 2 square bales: 1.2 m (3.9 ft) high each.

[The 3D picture at the top of this page is the reference MBC 2x3 - 790506].

• versatile 2-in-1 attachment that simplifies bale handling.
• Ideal solution for those handling small quantities of wrapped bales.
• Can handle square and round bales as well as wrapped bales.
• Change between configurations in under three minutes.
• Handles up to 2 bales.
• Easy hitching system (no tools, no dismantling).

• Synchronized closure.
• Handles 1 round bale Ø 1.8 m (5.9 ft) max. for the 2x4 and Ø 1.5 m to 2 m (4.9 ft to 6.6 ft) for the 2x3.
• Handles up to 2 square bales of maximum 0.8 m (2.6 ft) high per bale.

[The 3D picture at the top of this page is the reference CLBR 2x3 - 52001013].

• Easy to use attachment.
• Handles 1 round bale or 2 rectangular bales at the same time.
• Rounded teeth in wrought iron that offer accurate and clean penetration of materials.
• Optional: 2 lower teeth (680 mm / 27 in, Ø 35 mm / 1 in) that ensure a perfect stability while handling square bales.

• Synchronized closure.
• Impressive lifting capacity of 1800 kg (3968 lb).
• Handles 1 or 2 round bales Ø 1.8 m (5.9 ft) max.
• Handles up to 2 square bales 1.2 m (3.9 ft) high or 3 square bales 0.8 m (2.6 ft) high.
• Optional: 2 lower tines 680 mm (26.8 in) Ø 35 mm (1.4 in) ref. 790521 - spare parts kit.

[The 3D picture at the top of this page is the reference P2BG 2x4 - 790518].

• Easy and clean handling.
• Handles 2 round bales or 3 square bales at the same time.
• Optional: 2 lower teeth (680 mm / 27 in, Ø 35 mm / 1 in) that ensure a perfect stability while handling square bales.

• Non-synchronized closure.
• Capacity: 800 kg (1764 lb).
• Handles 1 round bale - Ø 1.8 m (5.9 ft) maximum.
• Handles 1 square bale - 1.2 m (3.9 ft) high.

[The 3D picture at the top of this page is the reference PBG 2x2 - 757639].

• Easy to use attachment
• Very compact clamp - ideal for indoor stacking
• Rounded teeth in wrought iron that offer accurate and clean penetration of materials.

• Synchronized closure.
• Handles 1 or 2 round bales from a minimum diameter of 1000 mm (39.4 in) to a maximum of 1800 mm (70.9 in).

• The bale clamp can take one or two round bales at the same time quickly and safely.
• The upper part clamp section is detachable for single-bale handling.
• The special geometry of the teeth prevents interference or snagging of bales placed side-by-side.

• Self-lubricated anti-wear ring that improves the longevity of the attachment.
• Welded monobloc chassis.
• CLBW 800 : handles wrapped bale with Ø from 0.85 m (2.8 ft) to 1.45 m (4.8 ft).
• CLBW 1500 : handles wrapped bale with Ø from 1 m (3.3 ft) to 1.7 m (5.6 ft).

• Rounded and articulated clamp designed to fit the shape of every bale.
• Powerful double effect cylinder allows the manipulation of very heavy bales.
• Smooth structure that avoids perforation of plastic film.

• Can handle round bales from a minimum diameter of 1000 mm (39.4 in) to a maximum of 1800 mm (70.9 in).

[The 3D picture at the top of this page is the reference PRF/M 150 - 569139].

• It is suitable for handling, loading and transporting round bales wrapped in film.
• Tubular design to fit the shape of every bale.
• Smooth structure that avoids any perforation of plastic film.

• Heavy-duty frame and components for intensive operations.
• Telescopic kinematics managing arm travel and clamping pressure.
• Standard hydraulic pressure limiter.

[The 3D picture at the top of this page is the reference CLBSW 2000/1000 - 52000812].

• The tubular frame design eliminates the risk of film damage when handling wrapped bales.
• Its wide clamp opening allows for handling large or multiple bales.
• Multi-task: designed for wrapped square bales but can also handle standard square bales or round bales.
  

• Articulated handles for a smooth pot clamping.
• Adjustable pressure limiter to prevent from damaging fragile pots (terracotta).
• Increased component protection & simplified maintenance.
• Handles pot with maximum diameter of 1 m (3.3 ft).

[The 3D picture at the top of this page is the reference CLP 1000/800 - 914770].

• Makes the handling of pots and plants in pots easy and efficient.
• Efficiently replaces forks, jibs or human strength.
• Wide opening & high capacity to adapt to many pot types.

• Adaptable number of tines depending on operational requirements.
• Tine operational mode: selectable between fixed or floating.
• Adjustable lateral spacing between forged tines.
• Load support frame with adjustable height settings.
• Vertical locking system for forged tines during road travel.

• Specifically designed for the efficient loading and handling of both round and square bales.
• Robust frame ensuring stable and secure transport of various forage types.
• A simple yet high-performance tool to optimize your storage and distribution cycles.

• Configurable number of tines to match specific operational needs.
• Tines can be operated in either fixed or floating positions.
• Adjustable spacing between the forged steel spears.
• Variable height settings for the bale backrest frame.
• Vertical locking mechanism for spears during road transportation.

• High-performance handling solution designed for loading round or square bales.
• Optimizes your work cycles with effortless penetration into the forage.
• Essential versatile tool for the daily storage and transportation of bales.
• Robust design ensuring maximum productivity during your agricultural tasks.

• The number of spears can vary depending on your needs.
• The spears can be used either fixed or floating.
• The distance between the forged spears can be adjusted.
• If required, the height of the bale support can be adjusted.
• For road use, the forged spears can be locked vertically.

• Designed for loading and handling round or square bales.

• Holding upper frame, easy under roof operations.
• Floating spears.
• Holding spears (without tools) for road traffic.
• FB 950/700: 2 spears, Ø 35 mm (1.4 in), 950 mm (37.4 in) working length.
• FB 1900/1700: 4 spears, Ø 45 mm (1.8 in), 1010 mm (39.8 in) working length.

• Efficient and economical square bale handling solution.
• FB 1900 / 1700 : Simultaneous handling up to 3 square bales (height : 800 mm / 31 in).
• FB 950/700 : load backrest included for a better stability of the load.
• Attachment adapted to road traffic.

• Massive structure and reinforced grapple for more longevity.
• Efficiently handle large amounts of manure thanks to the spears and grab functionality of this attachment.
• Adjustable grapple opening- more working accuracy.
• Forged spears & teeth- easy to dismantle.
• Well protected hydraulic components.

[The 3D picture at the top of this page is the reference FFGR 1500/600 - 52737500].

• Easy handling of compact manure.
• Design allows grab to close when clearing against walls.
• Versatile attachment that enables occasional square bale handling.

• Boxed structure, rigidity & longevity.
• Body made of high resistance steels.
• Heavy duty teeth for easy penetration.
• Lateral shears for a good pit penetration & clean cutting.
• Increased cylinder diameter for more power.
• Bolt-on cutting teeth for easy maintenance.
  

• Suitable for any type of silage.
• Clean silage pit face, limits secondary fermentation. 
• Powerful attachment for a fast cutting.
• Closed structure to limit material losses.
  

• Load backrest included as standard equipment.
• Integrated fork leveling system.
• Optional fork travel locking mechanism.
• Note: road circulation kit mandatory in Italy. Contact your dealer.
• Note: road circulation kit mandatory in Germany on MRT Vision/Vision+. Contact your dealer.

[The 3D picture at the top of this page is the reference CAF 1040/4 lb - 52866338].

• Solution specifically adapted to uneven ground, ensuring stability and efficiency.
• Equipped with a standard load backrest to prevent material from falling back.
• The fork leveling system allows for perfect alignment, making pallet entry and placement faster and easier.
• Fork travel lock possible (option).

• Remote hydraulic control for precise fork positioning directly from the operator's station.
• Heavy-duty shaft-mounted fork system (pin type) for superior load stability.
• Bolt-on backrest architecture designed for easy maintenance and extended service life.

[The 3D picture at the top of this page is the reference TFF 1030 TDL 5 T - 924864].

• Floating fork carriage with hydraulic side shift for efficient load placement.
• Load backrest for a higher load stability.

• Tilting forks.
• Forks compliant with FEM/ISO standard, forks' length according to model.
• Forks are not included in the PFB.

• Efficient handling solution. Load backrests stabilize paletized loads during transport.

• Tilting forks.
• Forks compliant with FEM/ISO standard, forks' length according to model.
• Forks are not included in the PFB, order 2 forks (except for CAT 1020/1500 + 2 F 100x40x1200 & CAT 1260/5T + F 150x50x1200 reference).

[The 3D picture at the top of this page is the reference CAT 1020/1500 + 2 F 100x40x1200 - 52706271].

• Efficient handling solution.

• Hydraulic line required to allow fork movement form the cab.
• Tilting forks.
• Forks compliant with FEM/ISO standard, forks length according to model.
• Forks are not included in the PFB, order 2 forks.

[The 3D picture at the top of this page is the reference CAT 1470/5000 SS - 52739518].

• Efficient handling solution. Side shift aids in load placement efficiency.
  

• Range from 4000 kg (8818 lb) to 6000 kg (13228 lb) capacity.
• Directly hitched on carriage.
• Safety: homologated swivel self-locking hook.

[The 3D picture at the top of this page is the reference JH 2500 - 52579090].

• Simple and cost efficient solutions for suspended load handling.
• Very compact attachment that preseves machine stability.
• Perfect for transporting construction elements and other loads present in construction or industrial sites.
  

• Max. total capacity of 4000 kg (8818 lb) with 4 loading points with 1000 kg (2205 lb) capacity each.
• 4 bag stoppers mounted on each loading point: limit the risk of bag falling.
• Anti-swing bag stabilizer, increases stability.

• Increases efficiency & safety of big bag handling.
• Main structure made of tubes- limits the risk of bag damage & falling.
• Elevated structure gives higher lifting height compared to forks and prevents any damage of trailer's roof while loading.
• Handles indifferently big bags with 1, 2 or 4 ears.
  

• Floating frame allows sweeper to float over uneven surfaces.
• ø 230 mm (9.1 in) side brush made from polyurethane and galvanized steel.
• Synchronisation valve: sweep and control the dirt bucket with 1 single hydraulic function.
• Pressure limiter.
• Brush ø 600 mm (23.6 in).
• 4x ø 200 mm (7.9 in) heavy-duty wheels.
• Recommended option: continuous hydraulic flow.

• High output attachment for the most demanding applications.
• Sweep and pick-up in one operation.
• Up to 2500 m² / 26910 ft2 cleaned in 10 minutes.
• High quality sweeping on uneven ground. 
• Interchangeable side brush (right or left) for perfect sweeping along wall and sidewalks.
  

• Protected hydraulic system, no return pipe to hydraulic oil tank required.
• Synchronisation valve: sweep and control the dirt tank with 1 single hydraulic function.
• Galvanized structure for more longevity.
• Synthetic brush ø 520 mm (20.5 in).
• Optional side brush ø 320 mm (12.6 in).
• Standard version: standard wheel, mechanical swivel.
• "+" version: reinforced wheels, mechanical swivel.
• "HWA +" version: reinforced wheels, hydraulic swivel, water sprayer (120 L / 4.2 ft³).
• MLA, MRT limitation: External temperature < 33°C (91.4°F) | usage < 2 hours a day.

• Simple & efficient solution for all light and medium duty applications.
• 2 in 1: sweeper-collector & side-pushing sweeper.
• Dust collector & front wheel standard.
• Fast, toolless switching from one configuration to the other.

• Made up of 8 rows of polypropylene brushes.
• Side wheels for wall-flush sweeping.
• Internal fork pocket dimension (width x height): 189 mm (7.4 in) x 80 mm (3.1 in).
• Fork pocket spread: 870 mm (34.3 in).
• Optional: additional rows of brushes can be added (up to 11 rows).
• Optional: in winter, you can use the inclined sliding blade to push away and sweep up any snow left behind.

• Can clean the floor in one pass, on uneven surfaces without generating dust.
• Can be fitted on all types of machines (fork-mounted attachment).
• No machine predisposition required.
• Dense and rigid brushes.
• Galvanized construction to last over time.

• Tank capacity of 600 L (158.5 gal).
• Hydraulic powered water pump.
• Pressure regulation from 10 bar (145 psi) to 200 bar (2901 psi).
• Manometer on standard.
• 45 min run time at 200 bar (2901 psi).
• Nozzle spray with a 40 m (131.2 ft) hose.

[The 3D picture at the top of this page is the reference VHPC 600 - 790335].

• Powerful and efficient cleaning.
• Suitable for all types of cleaning applications and maintenance tasks.
• Easy to hitch with a standard forks.