Attachment catalogue

MHT 790 ST5

July 22, 2026

• Wide range of bucket capacities from 500 L (17.7 ft³) to 1500 L (53.0 ft³).
• Construction bucket suitable for handling materials with a density ≤ 2100 kg/m³ (131 lb/ft³).
• Bucket equipped with interchangeable teeth for better longevity.
• Bucket to be used on machines equipped with an integrated side shift carriage ("TSDL").

• Durable bucket designed for an intensive use: digging, soil or rubble handling applications.
• Specially created for building site and earthwork.
• Very rigid structure that ensures excellent bucket longevity.
• Bucket fitted with teeth made for an easy and powerful penetration on earth.

• Strong welded teeth.
• Handling bulk materials with a density ≤ 1000 kg/m³ (62 lb/ft³).
• 500 HB bolted cutting edge.
• Protected hydraulic components.
• Additional welded plate on grab's teeth (WB: Welded Blade reference).
• Additional cutting blade, for paper applications, on grab's teeth (WBP: Welded Blade Paper reference).

[The 3D picture at the top of this page is the reference CBG 2450/1600 EN - 52000563].

• Makes for quick and efficient waste handling.
• Ideal attachment for the handling of bulk materials (paper, crushed green waste, etc.).
• Perfect for work on concrete, asphalt etc.
• Reinforced bucket for intensive waste applications.
• Flat bottom for an easy penetration in the waste pit & an efficient unloading.

• Strong attachments for a long lasting life.
• 500 HB bolted wear plate.
• Note: road circulation kit mandatory in Italy. Contact your dealer.

[The 3D picture at the top of this page is the reference CBR 2000/2500 LDR MHT - 52000532].

• High-resistance general purpose buckets adapted to the power of MHT heavy telehandlers.

• Max. density 1000 kg/m³ (62 lb/ft³).
• 500 HB bolted wear plate.
• Note: road circulation kit mandatory in Italy. Contact your dealer.

[The 3D picture at the top of this page is the reference CBA 2500/4000 LDR MHT - 52000534].

• High-resistance light material buckets adapted to the power of MHT heavy telehandlers.

• For cylinders with diameter from 250 mm (9.8 in) to 530 mm (20.9 in).
• Maximum capacity up to 4000 kg (8818 lb).
• Cylinder holding with cables.
• Hydraulic movements: body rotation, side shift.
• Body rotation 22.5°, side shift 150 mm (5.9 in), hydraulic telescopic extension, hydraulic side body tilt 15°/15°, manual head rotation 35°.
• Clamp reduction pads for smaller cylinders.

[The 3D picture at the top of this page is the reference CH4 - 911968].

• Efficient & safe cylinder handling solutions.
• Faster, safer maintenance leading to less production losses.
• Robust conception designed for mining sites conditions.
• Safety & Productivity: smooth and accurate cylinder catching and positioning.
• Permanent cylinder grip: no suspended load, no risk of sudden slippage or fall.
• As functional as a human wrist.

• Maximum capacity up to 14000 kg (30865 lb).
• Max. pipe diameter up to 1016 mm (40.0 in).
• Increased component protection for less downtime.
• Complete grapple opening, increased efficiency when loading palletized loads.
• Rubber-covered tine pads.
• Fork dimensions up to 120 x 200 x 2400 mm (4.7 in x 7.9 in x 94.5 in).
• Forks can be used in floating or fixed mode.

[The 3D picture at the top of this page is the reference PH 2100/8000 - 939231].

• Increases working safety & output on all pipe-handling applications.
• Secure handling of pipes thanks to its mobile grapple with hydraulic tine pads- increased safety on rough terrain.
• “Appendix” at the end of the grapple, ensures complete closing & prevents the pipes from sliding away.
• Separated control of grapple & tine pads for more accuracy.
• Increased versatility: can be used to handle many types of loads.

• Safe solution for Tire removal in mining environments.
• Complex hydraulic movements: body rotation, pad rotation, side shift + machine tilt.
• Safety: anti-fall arms.
• Parallelogram kinematics (except TH49).
• Controlled from the cab or with a remote control.
• Safety: each movement activated by 2 operator actions (button + joystick).
• TH 49/ 2500: left pad active, right pad passive.

[The 3D picture is the reference TH 49/2500 - 914600].

• Tyre changes made fast & safe.
• Significant improvement in tyre changing operations.
• No compromise with safety.
• As mobile as a human wrist.
• Wide range of diametres & capacities to suit all dump truck.
• Available on a wide range of machines.

• Maximum capacity up to 2900 kg (6393 lb).
• Clamping with forks, 93 mm (3.7 in) thin.
• Accept a wide variety of tire diameters.
• Compact design, centre of gravity stays close to the telehandler.
• Body rotation: ± 360°.
• Constant side shift: ± 100 mm (3.9 in).
• Control: from cab or remote control (MHT).

[The 3D picture at the top of this page is the reference TH 35/2900 S - 939040].

• A compact solution for all limited-access tyre removal operations.
• Fork-based concept (2 pairs of forks), suitable for underground mining trucks.
• Perfect tyre holding, fork covered with anti-slip material.
• Available on several telehandler types.
• Limited machine downtime.

• Load backrest standard.
• Fork leveling.
• Option fork travel lock.
• Note: road circulation kit mandatory in Italy. Contact your dealer.
• Note: road circulation kit mandatory in Germany on MRT Vision/Vision+. Contact your dealer.

• Guaranteed stability and efficiency for all handling operations on uneven or rough ground.
• Enhanced safety with a standard load backrest designed to prevent materials from falling back.
• Increased productivity via the fork leveling system, ensuring smooth and fast pallet entry and placement.
• Operational versatility with the optional fork travel lock to adapt to various jobsite requirements.

• Tilting forks.
• Forks compliant with FEM standard, forks' length according to model.
• Note: road circulation kit mandatory in Italy. Contact your dealer.
• Note: road circulation kit mandatory in Germany on MRT Vision/Vision+. Contact your dealer.

[The 3D picture at the top of this page is the reference CAT 1320/6 T (a) - 52718348].

• Efficient handling solution. Load backrests stabilize paletized loads during transport.

• Heavy duty design for rough terrain applications.
• Pin type fork positioning.
• Tilting forks.
• Cylinders holders : prevent cylinders from bending in harsh conditions.
• Note : fork spread measured on the outer fork edges.

[The 3D picture at the top of this page is the reference CAT 2500/22T + P - 52727776].

• Must-have attachment for the MHTs.
• Designed for off-road use, suitable even for the toughest working conditions.
• Optimized thickness for more capacity.
• Maximum component protection.
• Improved visibility for higher working speed.
• Possibility to unlock forks to turn it floating (only 9 t / 19845 lb).
  

• Heavy duty design for rough terrain applications.
• Pin type fork positioning + variable side shift (constant only 9 T (19842 lb)).
• Pin-type forks inserted into "sliders" (only 9 T (19842 lb)).
• Tilting forks.
• Cylinders holders: prevent cylinders from bending in harsh conditions.
• Note: fork spread measured on the outer fork edges.

[The 3D picture at the top of this page is the reference CAT 2500/22T + P+ SS - 52697145].

• A must-have attachment for MHT telehandlers, engineered for the toughest off-road working conditions.
• Optimized thickness for higher lifting capacity and maximum protection of all components.
• Improved visibility ensuring higher working speeds and enhanced safety.
• Versatile: forks can be unlocked to switch to floating mode (9 t / 19,845 lb version only).
• Integrated positioner and side shift for ultra-precise load adjustment.

• Tilting forks.
• Forks compliant with FEM standard, forks' length according to model.
• Constant side shift.
  
• Note: road circulation kit mandatory in Italy. Contact your dealer.
• Note: road circulation kit mandatory in Germany on MRT Vision/Vision+. Contact your dealer.

[The 3D picture at the top of this page is the reference PFB 1320 - 924878].

• Efficient handling solution. Side shift aids in load placement efficiency.
  

• 3 capacity / load points.
• Safety: homologated swivel self locking hook.

[The 3D picture at the top of this page is the reference P 25 T - 53010431].

• Perfect attachments for all heavy suspended loads.
• Jib fitted with 3 hooks to meet various needs of building sites.
• Adaptability for all yard handling applications.
  

• Suspended load capacity up to 25000 kg (55116 lb).
• Safety: Homologated swivel self-locking hook.

[The 3D picture at the top of this page is the reference PC 9 T - 939970].

• Efficient and heavy duty suspended load solution.
• Directly hitched on carriage for secured application.
• Very compact attachment that preserves machine stability.

• Capacity 200 kg (441 lb) or 365 kg (805 lb).
• Platform fixed.
• Legally approved up to 3 people (platform capacity includes up to 3 people).
• Overload (200 kg (4401 lb) or 365 kg (805 lb)) and presence sensor.
• Painted platform.
• Non-slip metal floor.
• Fork sleeves: 238 mm (9.4 in) x 100 mm (3.9 in).

[The 3D picture at the top of this page is the reference NAC 2M - 788782].

• Uncompromised safety for all your people lifting applications.
• Simple and high-performing platform, providing a cost-effective solution.
• Maximum protection ensured by a continuous handrail around the entire platform.
• Dual side access for increased flexibility and convenience on site.
• Equipped with integrated fork sleeves for easy handling around the yard.

• Capacity 365 kg (805 lb).
• Slewing platform +/- 90° on both sides or fixed.
• Legally approved for 3 people (platform capacity includes 3 people).
• Overload (365 kg (805 lb)) and presence sensor.
• Painted platform.
• Non-slip metal floor.

• Uncompromized safety in people lifting applications.
• Simple and efficient platform.
• Cost efficient solution for people lifting.
• Safety: hand rail all around the platform.
• Access from both sides for higher flexibility.
• Fork sleeves for yard handling.

• Platform fitted with a FOPS-type roof.
• Protected elevated position (+ 300 mm / 11.8 in) for ref. 52574289.
• Capacity 1000 kg (2205 lb).
• Rotation 90° on both sides.
• Fork sleeves for yard handling.
• Dismountable roof: the platform can be used for standard applications when protection is not required for ref. 52719263.
• Black painted ref. 52719263.

[The 3D picture at the top of this page is the reference ORH 1T FOPS1 - 52574289].

• Maximum protection for tunneling applications
• No unsafe climbing on the platform required to work above the FOPS roof for ref.52574289
• To use heavy tools in the platform.
• No compromise on safety: EN 280 compliant

• Hydraulic motor + end of cable automatic movement stop.
• Oil immersed negative brake.
• Double or quadruple line pull (according to type).
• Homologated swivel self locking hook.
• Winch storage stand with sleeves for fork handling.
• Note: dimensions below are given for winch placed on its stands.

[The 3D picture at the top of this page is the reference Winch 25T - 52693990].

• Turn your telehandler into a crane for your heaviest lifting operations.
• Extremely fast implementation on the Manitou carriage for immediate productivity.
• Exceptional precision and fluid movements for secure and accurate load handling.
• Robust heavy-duty design ensuring maximum reliability in the most demanding environments.

• Protected hydraulic system, no return pipe to hydraulic oil tank required.
• Synchronisation valve: sweep and control the dirt tank with 1 single hydraulic function.
• Galvanized structure for more longevity.
• Synthetic brush ø 520 mm (20.5 in).
• Optional side brush ø 320 mm (12.6 in).
• Standard version: standard wheel, mechanical swivel.
• "+" version: reinforced wheels, mechanical swivel.
• "HWA +" version: reinforced wheels, hydraulic swivel, water sprayer (120 L / 4.2 ft³).
• MLA, MRT limitation: External temperature < 33°C (91.4°F) | usage < 2 hours a day.

• Simple & efficient solution for all light and medium duty applications.
• 2 in 1: sweeper-collector & side-pushing sweeper.
• Dust collector & front wheel standard.
• Fast, toolless switching from one configuration to the other.