Attachment catalogue

MHT 11250 ST5

April 29, 2026

• Strong attachments for a long lasting life.
• 500 HB bolted wear plate.
• Note: road circulation kit mandatory in Italy. Contact your dealer.

[The 3D picture at the top of this page is the reference CBR 2000 / 2500 LDR MHT - 52000532].

• High-resistance general purpose buckets adapted to the power of MHT heavy telehandlers.

• Max. density 1000 kg/m³ / 62 lb/ft³.
  
• 500 HB bolted wear plate.
  
• Note: road circulation kit mandatory in Italy. Contact your dealer.

[The 3D picture at the top of this page is the reference CBA 2500 / 4000 LDR MHT - 52000534].

• High-resistance light material buckets adapted to the power of MHT heavy telehandlers.

• Load backrest standard.
• Fork levelling.

• Solution adapted to uneven ground : floating forks + leveling.

• Heavy duty design for rough terrain applications.
• Pin type fork positioning.
• Tilting forks.
• Cylinders holders : prevent cylinders from bending in harsh conditions.
• Note : fork spread measured on the outer fork edges.

[The 3D picture at the top of this page is the reference CAT 2500 / 22T + P - 52727776].

• Must-have attachment for MHTs.
• Designed for off-road use, suitable even for the worst working conditions.
• Limited thickness for better residual capacity.
• Maximum component protection.
• Improved visibility for higher working speed.
• Possibility to unlock forks to turn it floating (only 9 t / 19845 lb).

• Heavy duty design for rough terrain applications.
• Pin type fork positioning + variable side shift (constant only 9 T / 19845 lb).
• Pin-type forks inserted into "sliders" (only 9 T / 19845 lb).
• Tilting forks.
  
• Cylinders holders: prevent cylinders from bending in harsh conditions.
• Note: fork spread measured on the outer fork edges.

[The 3D picture at the top of this page is the reference CAT 2500 / 22T + P+ SS - 52697145].

• Must-have attachment for the MHTs.
• Designed for off-road use, suitable even for the worst working conditions.
• Limited thickness for more capacity.
• Maximum component protection.
• Improved visibility for higher working speed.
• Possibility to unlock forks to turn it floating (only 9 t / 19845 lb).
  

• 3 capacity / outreach couples.
• Safety: homologated swivel self locking hook.

[The 3D picture at the top of this page is the reference P 25 T - 53010431].

• Perfect attachments for all heavy suspended loads.
• Jib fitted with 3 hooks to meet various needs of building sites.
• Adaptability for all yard handling applications.
  

• Suspended load capacity up to 25000 kg / 55125 lb.
• Safety: Homologated swivel self locking hook.

[The 3D picture at the top of this page is the reference PC 9 T - 939970].

• Efficient and heavy duty suspended load solution.
• Directly hitched on carriage for secured application.
• Very compact attachment that preserves machine stability.

• Capacity 365/1000/700 kg / 805/2205/1544 lb including 3 people.
• Unfolded working width 4,4 m / 14 ft
• Slewing platform +/- 90°on both sides.
• Legally approved for 3 persons.
• Accessible from 3 sides (2x Side + 1 front).
• version "D": right access with side door.
• version "DD": front and right access with side door.
• Overload sensor.
• Fork sleeves: 238 mm x 100 mm / 9 in x 4 in.

[The 3D picture at the top of this page is the reference P 4400/700 S EXT D - 52869500].

• Flexibility on aerial working situations.
• User-friendly opening system, complete opening/closing within 50 seconds.
• Heavy duty, galvanized structure for an improved longevity.
• Non-slip metal floor.
• Expandable sides are independent.
• Fork sleeves for yard handling.

• Capacity 200 kg / 441 lb or 365 kg / 805 lb.
• Slewing platform +/- 90° on both sides or fixed.
• Legally approved for 3 people (platform capacity includes 3 people).
• Overload (365 kg / 805 lb only) and presence sensor.
• Painted platform.
• Non-slip metal floor.
• Fork sleeves: 238 mm x 100 mm.
• E-Reco 2 - 52719658 : Version dedicated to North American & Australian/NZ markets.

[The 3D picture at the top of this page is the reference NAC 2M - 52869493].

• Uncompromized safety in people lifting applications.
• Simple and efficient platform.
• Cost efficient solution for people lifting.
• Safety: hand rail all around the platform.
• Access from both sides for higher flexibility.
• Fork sleeves for yard handling.

• 450 kg / 992 lb or 600 kg / 1323 lb for platform + 450 kg / 992 lb or 300 kg / 662 lb for winch = 900 kg / 1985 lb capacity in total.
• 2 different winch capacity / platform capacity couples.
• Hydraulic winch fitted on the rotating (manual) liftable (hydraulic) telescopic (manual) jib.
• Slewing platform +/- 90° on both sides.
• Legally approved for 3 persons.
• Overload sensor on the platform + overload sensor on the winch.
• Fork sleeves for yard handling.

• Performance in cladding & maintenance applications.
• Uncompromized safety + unbeaten efficiency.
• Heavy duty and galvanized structure for an improved longevity.
• Non-slip metal floor.
• Expandable sides are independent.
• Manual jib + winch positioning.
• Hydraulic jib + winch lifting, prevents from the pulling the load in the basket.

• Hydraulic motor+ end of cable automatic movement stop.
• Oil immersed negative break.
• Double or quadruple line pull (according to type).
• Homologated swivel self locking hook.
• Winch strorage stand with sleeves for fork handling.
• Note: dimensions below are given for winch placed on its stands.

[The 3D picture at the top of this page is the reference Winch 23T - 939329].

• Turns your telehandler into a crane.
• Estremely fast implementation on the MANITOU carriage.
• Easy steering from the cab or with the machine's remote control (optional).
• Fast and accurate movements.

• For cylinders with diameter from 0 mm to 630 mm / 25 in.
• Maximum capacity up to 10500 kg / 23153 lb.
• Cylinder holding with cables (CH 4) or clamps (CH 10).
• Hydraulic movements: body rotation, side shift.
• CH4: Body rotation 22.5°, side shift 150 mm / 6 in, hydraulic telescopic extension, hydraulic side body tilt 15°/15°, head rotation 35°.
• CH10: body rotation 340°, head vertical tilt 90°.
• CH10: clamping pressure alarm & pressure gauge on each front & side.
• Clamp reduction pads for smaller cylinders.

[The 3D picture at the top of this page is the reference CH10 - 939239].

• Efficient & safe cylinder handling solutions.
• Faster, safer maintenance leading to less production losses.
• Robust conception designed for mining sites conditions.
• Safety & Productivity: smooth and accurate cylinder catching and positioning.
• Permanent cylinder grip: no suspended load, no risk of sudden slippage or fall.
• As functional as a human wrist.

• Maximum capacity 14000 kg / 30865 lbs.
• Max. pipe diameter 1016 mm / 40”.
• Increased component protection for less downtimes.
• Complete grapple opening, increased efficiency when loading palletized loads.
• Rubber-covered tine pads.
• Fork dimensions: 120 x 200 x 2400 mm / 4.7 x 8 x 94.5”.
• Forks can be used in floating or fixed mode.

[The 3D picture at the top of this page is the reference PH 2100 / 8000 - 939231].

• Increases working safety & output on all pipe-handling applications.
• Perfect upholding of pipes thanks to its mobile grapple with hydraulic tine pads- increased safety on rough terrain.
• “Appendix” at the end of the grapple, ensures complete closing & prevents the pipes from sliding away.
• Separated control of grapple & tine pads for more accuracy.
• Increased polyvalence: can be used to handle other loads.

• Safe solution for tyre removal in mining environments.
• Complex hydraulic movements: body rotation, pad rotation, side shift+ machine tilt & telescope extension.
• Safety: anti-fall arms.
• Telescopic (TH 49) or parallelogram kinematics (all other clamps).
• Controlled from the cab or with a remote control.
• Safety: each movement activated by 2 operator actions (button + joystick).
• TH 49/ 2500: 1 left pad active, right pad passive.

[The 3D picture at the top of this page is the reference TH 49 / 2500 - 914600].

• Tyre changes made fast & safe.
• Significant improvement in tyre changing operations.
• No compromise with safety.
• As mobile as a human wrist.
• Wide range of diametres & capacities to suit all dump truck.
• Available on a wide range of machines.

• Robust and shielded structure with multiple protective bumpers
• Legaly aproved for 3 people
• Plain floor or meshed floor.

• Solution for specific applications in mining. 
• Maximum safety when lifting people.