Attachment catalogue

MHT 10200 ST5

July 22, 2026

• Strong attachments for a long lasting life.
• 500 HB bolted wear plate.
• Note: road circulation kit mandatory in Italy. Contact your dealer.

[The 3D picture at the top of this page is the reference CBR 2000/2500 LDR MHT - 52000532].

• High-resistance general purpose buckets adapted to the power of MHT heavy telehandlers.

• Max. density 1000 kg/m³ (62 lb/ft³).
• 500 HB bolted wear plate.
• Note: road circulation kit mandatory in Italy. Contact your dealer.

[The 3D picture at the top of this page is the reference CBA 2500/4000 LDR MHT - 52000534].

• High-resistance light material buckets adapted to the power of MHT heavy telehandlers.

• For cylinders with diameter from 230 mm (9.1 in) to 640 mm (25.2 in).
• Maximum capacity up to 10500 kg (23148 lb).
• Cylinder holding with clamps.
• Hydraulic movements: body rotation, side shift.
• Body rotation 340°, head vertical tilt 90°.
• Clamping pressure alarm & pressure gauge on each front & side.
• Clamp reduction pads for smaller cylinders.

[The 3D picture at the top of this page is the reference CH10 - 939239].

• Efficient & safe cylinder handling solutions.
• Faster, safer maintenance leading to less production losses.
• Robust conception designed for mining sites conditions.
• Safety & Productivity: smooth and accurate cylinder catching and positioning.
• Permanent cylinder grip: no suspended load, no risk of sudden slippage or fall.
• As functional as a human wrist.

• For cylinders with diameter from 250 mm (9.8 in) to 530 mm (20.9 in).
• Maximum capacity up to 4000 kg (8818 lb).
• Cylinder holding with cables.
• Hydraulic movements: body rotation, side shift.
• Body rotation 22.5°, side shift 150 mm (5.9 in), hydraulic telescopic extension, hydraulic side body tilt 15°/15°, manual head rotation 35°.
• Clamp reduction pads for smaller cylinders.

[The 3D picture at the top of this page is the reference CH4 - 911968].

• Efficient & safe cylinder handling solutions.
• Faster, safer maintenance leading to less production losses.
• Robust conception designed for mining sites conditions.
• Safety & Productivity: smooth and accurate cylinder catching and positioning.
• Permanent cylinder grip: no suspended load, no risk of sudden slippage or fall.
• As functional as a human wrist.

• Maximum capacity up to 14000 kg (30865 lb).
• Max. pipe diameter up to 1016 mm (40.0 in).
• Increased component protection for less downtime.
• Complete grapple opening, increased efficiency when loading palletized loads.
• Rubber-covered tine pads.
• Fork dimensions up to 120 x 200 x 2400 mm (4.7 in x 7.9 in x 94.5 in).
• Forks can be used in floating or fixed mode.

[The 3D picture at the top of this page is the reference PH 2100/8000 - 939231].

• Increases working safety & output on all pipe-handling applications.
• Secure handling of pipes thanks to its mobile grapple with hydraulic tine pads- increased safety on rough terrain.
• “Appendix” at the end of the grapple, ensures complete closing & prevents the pipes from sliding away.
• Separated control of grapple & tine pads for more accuracy.
• Increased versatility: can be used to handle many types of loads.

• Safe solution for Tire removal in mining environments.
• Complex hydraulic movements: body rotation, pad rotation, side shift + machine tilt.
• Safety: anti-fall arms.
• Parallelogram kinematics (except TH49).
• Controlled from the cab or with a remote control.
• Safety: each movement activated by 2 operator actions (button + joystick).
• TH 49/ 2500: left pad active, right pad passive.

[The 3D picture is the reference TH 49/2500 - 914600].

• Tyre changes made fast & safe.
• Significant improvement in tyre changing operations.
• No compromise with safety.
• As mobile as a human wrist.
• Wide range of diametres & capacities to suit all dump truck.
• Available on a wide range of machines.

• Load backrest standard.
• Fork leveling.
• Option fork travel lock.
• Note: road circulation kit mandatory in Italy. Contact your dealer.
• Note: road circulation kit mandatory in Germany on MRT Vision/Vision+. Contact your dealer.

• Guaranteed stability and efficiency for all handling operations on uneven or rough ground.
• Enhanced safety with a standard load backrest designed to prevent materials from falling back.
• Increased productivity via the fork leveling system, ensuring smooth and fast pallet entry and placement.
• Operational versatility with the optional fork travel lock to adapt to various jobsite requirements.

• Hydraulic circuit with pressure limiter.
• Fork spread: 275 mm (10.8 in) / 1010 mm (39.8 in).
• Standard load backrest.
• Pin-type forks—moved through "sliders".
• Note: fork spread measured on the outer fork edges.

[The 3D picture at the top of this page is the reference CAF 1260 / 4500 P - 52000273].

• Must-have attachment for each & any construction site
• 1 model for the complete MT range-advantage for rental fleets
• Time saving: change fork spread from the cab
• Precise hydraulic fork movements for more accuracy
• Floating forks with leveling capacity for rough terrain applications
• Safety: fork travel lock

• Heavy duty design for rough terrain applications.
• Pin type fork positioning.
• Tilting forks.
• Cylinders holders : prevent cylinders from bending in harsh conditions.
• Note : fork spread measured on the outer fork edges.

[The 3D picture at the top of this page is the reference CAT 2500/22T + P - 52727776].

• Must-have attachment for the MHTs.
• Designed for off-road use, suitable even for the toughest working conditions.
• Optimized thickness for more capacity.
• Maximum component protection.
• Improved visibility for higher working speed.
• Possibility to unlock forks to turn it floating (only 9 t / 19845 lb).
  

• Heavy duty design for rough terrain applications.
• Pin type fork positioning + variable side shift (constant only 9 T (19842 lb)).
• Pin-type forks inserted into "sliders" (only 9 T (19842 lb)).
• Tilting forks.
• Cylinders holders: prevent cylinders from bending in harsh conditions.
• Note: fork spread measured on the outer fork edges.

[The 3D picture at the top of this page is the reference CAT 2500/22T + P+ SS - 52697145].

• A must-have attachment for MHT telehandlers, engineered for the toughest off-road working conditions.
• Optimized thickness for higher lifting capacity and maximum protection of all components.
• Improved visibility ensuring higher working speeds and enhanced safety.
• Versatile: forks can be unlocked to switch to floating mode (9 t / 19,845 lb version only).
• Integrated positioner and side shift for ultra-precise load adjustment.

• 3 capacity / load points.
• Safety: homologated swivel self locking hook.

[The 3D picture at the top of this page is the reference P 25 T - 53010431].

• Perfect attachments for all heavy suspended loads.
• Jib fitted with 3 hooks to meet various needs of building sites.
• Adaptability for all yard handling applications.
  

• Suspended load capacity up to 25000 kg (55116 lb).
• Safety: Homologated swivel self-locking hook.

[The 3D picture at the top of this page is the reference PC 9 T - 939970].

• Efficient and heavy duty suspended load solution.
• Directly hitched on carriage for secured application.
• Very compact attachment that preserves machine stability.

• Capacity 200 kg (441 lb) or 365 kg (805 lb).
• Platform fixed.
• Legally approved up to 3 people (platform capacity includes up to 3 people).
• Overload (200 kg (4401 lb) or 365 kg (805 lb)) and presence sensor.
• Painted platform.
• Non-slip metal floor.
• Fork sleeves: 238 mm (9.4 in) x 100 mm (3.9 in).

[The 3D picture at the top of this page is the reference NAC 2M - 788782].

• Uncompromised safety for all your people lifting applications.
• Simple and high-performing platform, providing a cost-effective solution.
• Maximum protection ensured by a continuous handrail around the entire platform.
• Dual side access for increased flexibility and convenience on site.
• Equipped with integrated fork sleeves for easy handling around the yard.

• Capacity 365/1000/700 kg (805/2205/1543 lb) including 3 people.
• Unfolded working width 4.4 m (14.4 ft).
• Slewing platform +/- 90° on both sides.
• Legally approved for 3 persons.
• Accessible from 3 sides (2x Side + 1 front).
• Overload sensor.
• Fork sleeves: 238 mm (9.4 in) x 100 mm (3.9 in).

• Flexibility for aerial working situations.
• User-friendly opening system, complete opening/closing within 50 seconds.
• Heavy duty, galvanized structure for an improved longevity.
• Non-slip metal floor.
• Expandable sides are independent.
• Fork sleeves for yard handling.

• Robust and shielded structure with multiple protective bumpers.
• Legally approved for 3 people.
• Meshed floor.

• Hydraulic motor + end of cable automatic movement stop.
• Oil immersed negative brake.
• Double or quadruple line pull (according to type).
• Homologated swivel self locking hook.
• Winch storage stand with sleeves for fork handling.
• Note: dimensions below are given for winch placed on its stands.

[The 3D picture at the top of this page is the reference Winch 25T - 52693990].

• Turn your telehandler into a crane for your heaviest lifting operations.
• Extremely fast implementation on the Manitou carriage for immediate productivity.
• Exceptional precision and fluid movements for secure and accurate load handling.
• Robust heavy-duty design ensuring maximum reliability in the most demanding environments.